Cisco cBR 8 Configuration Guide

CHAPTER 3
DOCSIS 1.1 for the Cisco CMTS Routers
This document describes how to configure the Cisco CMTS router for Data-over-Cable Service Interface
Specifications (DOCSIS) 1.1 operations.
Finding Feature Information
Your software release may not support all the features documented in this module. For the latest feature
information and caveats, see the release notes for your platform and software release. To find information
about the features documented in this module, and to see a list of the releases in which each feature is
supported, see the Feature Information Table at the end of this document.
Use Cisco Feature Navigator to find information about platform support and Cisco software image support.
To access Cisco Feature Navigator, go to http://tools.cisco.com/ITDIT/CFN/. An account on http://
www.cisco.com/ is not required.
Contents
•
Hardware Compatibility Matrix for Cisco cBR Series Routers, page 32
•
Prerequisites for DOCSIS 1.1 Operations, page 32
•
Restrictions for DOCSIS 1.1 Operations, page 33
•
Information about DOCSIS 1.1, page 35
•
How to Configure the Cisco CMTS for DOCSIS 1.1 Operations, page 47
•
Monitoring DOCSIS Operations, page 61
•
Configuration Examples for DOCSIS 1.1 Operations, page 68
•
Additional References, page 71
•
Feature Information for DOCSIS 1.1 for Cisco CMTS Routers, page 71
Cisco cBR Series Converged Broadband Routers Quality of Services Configuration Guide for Cisco IOS XE Fuji
16.7.x
31

Cisco cBR 8 Specifications

General

Brand	Cisco
Model	cBR 8
Category	Network Router
Language	English