Cisco MDS 9700 Series User Manual

switch(config)# copy usb1:licenses_archive_file_name.tar bootflash:switch_license.tar
Copy progress 100% 10KB
Copy complete, now saving to disk (please wait)...
switch(config)# copy bootflash:switch_license.tar bootflash:switch_license.lic
Copy progress 100% 10KB
Copy complete, now saving to disk (please wait)...
switch(config)# install license bootflash:switch_license.lic
Installing license...........................done
switch# show license usage
Feature Ins Lic Status Expiry Date Comments
Count
--------------------------------------------------------------------------------
IOA_X9334 No 0 In use Grace 115D 2H
FM_SERVER_PKG No - Unused -
MAINFRAME_PKG No - Unused -
ENTERPRISE_PKG Yes - Unused never -
SAN_ANALYTICS_PKG No - In use Grace 119D 20H
SAN_TELEMETRY_PKG No - Unused Grace 109D 1H
Step 13 If the standby Supervisor-1 Module is not in the powered down state, then put the standby Supervisor-1 Module to out
of service, using the out-of-service module slot command .
Where a slot indicates the chassis slot number in which the standby supervisor module resides.
switch(config)# out-of-service module 6
Step 14 Remove the Supervisor -1 Module from the chassis.
Refer the “Verification” section to verify that the Supervisor-1 Module configurations are successfully applied to the
Supervisor-4 Module.
To view the inventory information for modules from the Cisco DCNM Web UI, Choose Inventory > View > Modules.
The Modules window is displayed with a list of all the switches and its details for a selected scope.
For more information, see the Cisco DCNM SAN Management Configuration Guide.
What to do next
Migrate the Crossbar Fabric-1 Switching Modules to Crossbar Fabric-3 Switching Modules. For more
information, see the “Nondisruptive Migration from Crossbar Fabric-1 Switching Modules to Crossbar Fabric-3
Switching Modules” section
Verification
Use the following show commands to verify the migration procedure for the Supervisor-4 Module:
• show version
• show module
• show interface brief
Cisco MDS 9700 Series Switches Hardware Installation Guide
138
Installing, Removing, and Verifying Field Replaceable Units
Verification

Cisco MDS 9700 Series Specifications

General

Brand	Cisco
Model	MDS 9700 Series
Category	Switch
Language	English