Cisco MDS 9700 Series User Manual

CHAPTER 7
Technical Specifications
This chapter provides technical specifications and includes the following sections:
• Switch Specifications, on page 181
• Module Specifications, on page 183
• Power Specifications, on page 188
• Component Power Requirements and Heat Dissipation, on page 189
• SFP+ Transceiver Specifications, on page 196
Switch Specifications
These equipment are designed to boot up in less than 30 minutes, depending on its neighboring devices be
fully up and running.
Note
The following table lists the environmental specifications for the Cisco MDS 9700 Series.
Table 21: Environmental Specifications for the Cisco MDS 9700 Series
SpecificationDescription
32 to 104°F (0 to 40°C)Temperature, certified for operation
–40 to 158°F (–40 to 70°C)Temperature, ambient non operating and storage
10 to 90%Humidity (RH), ambient (non condensing) operating
10 to 95%Humidity (RH), ambient (non condensing) non
operating and storage
–197 to 6500 ft (–60 to 2000 m)Altitude, certified for operation
This section contains the switch specifications for the following models:
Switch Specifications for Cisco MDS 9706 Director
The following table lists the physical specifications for the Cisco MDS 9706 Director.
Cisco MDS 9700 Series Switches Hardware Installation Guide
181

Cisco MDS 9700 Series Specifications

General

Brand	Cisco
Model	MDS 9700 Series
Category	Switch
Language	English