Administering Your Cisco RV180/RV180W
Importing CSV Files
Cisco RV180/RV180W Administration Guide 149
7
To save a copy of your router’s mirror configuration, click Backup Mirror
Configuration. The browser downloads the configuration file and prompts you to
save the file on the PC.
The mirror image is the last working configuration. The startup configuration is the
configuration that the device used to boot up. The startup and mirror
configurations can differ. For example, if you made changes to the current
configuration but forgot to save it, after 24 hours, the device automatically saves
the currently-running configuration as the “mirror” image. But if the device crashed
during the 24 hour window, then the device will use the startup configuration to
boot up.
To copy the mirror configuration file to the startup configuration file, click Copy
Mirror to Startup. This replaces the startup configuration file with the mirror
configuration file. You may want to do this if the device crashed and you had to
reset the device to factory defaults. After you perform the factory reset, the mirror
image is not erased, and you can copy it to the startup configuration to allow the
device to use the configuration to boot up.
Importing CSV Files
You can import VPN client setting files that contain the username and passwords
of clients in a Comma Separated Value (CSV) text file. You can use Excel to create
a CSV file containing the VPN client settings. The file should contain one row for
the headings and one or more rows for the VPN clients. For example, the following
specifies the settings of two users (a PPTP user and a QuickVPN user) to import:
The Format of the .csv file is as follows:
"<SSLVPNDomain Code>", "<D
omainName>", "<PortalLayoutName>",
"<AuthenticationType>", "<AuthenticationServer>",
"<AuthenticationRadiusSecret>", "<NTDomainWorkGroup>", "<LDAPBaseDN>",
"<ActiveDirectoryDomain>"
PROTOCOL USERNAME PASSWORD
PPTP pptp-user-1 12345678
QuickVPN qv-user-1 12345678
To Next Page
Loading...
Need help?
General
