Cisco RV180 Administrator's Manual

Configuring Networking
Configuring the WAN (Internet) Settings
Cisco RV180/RV180W Administration Guide 30
2
To configure the MAC address settings:
STEP 1 Choose Networking > WAN (Internet) > IPv4 WAN (Internet).
STEP 2 From the MAC Address Source drop-down menu, choose one of these options:
• Use Default Address—(Recommended) choose this option to use the
default MAC address. However, if another MAC address has previously been
registered with your ISP, choose either Use This Computer’s Address or Use
This MAC.
• Use This Computer's Address—Choose this option to assign the MAC
address of your computer that you are using to connect to the Device
Manager.
• Use This MAC—Choose this option if you want to enter a different MAC
address. Enter the address in the MAC Address field.
STEP 3 Click Save.
Configuring PPPoE Profiles
If you have a PPPoE connection to the Internet, you can create profiles for multiple
PPPoE accounts. This can be useful if you connect to the Internet using different
service provider accounts. The PPPoE Profiles page lists the available PPPoE
profiles and some attributes associated with each profile.
Adding or Editing a PPPoE Profile
STEP 1 Choose Networking > WAN (Internet) > PPPoE Profiles.
STEP 2 Click Add to create a new profile, or select the check box in the row of the profile
you want to edit and click Edit.
STEP 3 Enter or change the following information (you may need to contact your ISP to
obtain your PPPoE login information):
Profile Name Enter the name of the profile.
Username Enter your username assigned to you by the ISP.
Password Enter your password assigned to you by the ISP.

Cisco RV180 Specifications

General

Brand	Cisco
Model	RV180
Category	Network Router
Language	English