Name: Cisco RV180
Brand: Cisco
Rating: 4 (1 reviews)

To Next Page

To Previous Page

Configuring the Wireless Network (Cisco RV180W)

Configuring Basic Wireless Settings

Cisco RV180/RV180W Administration Guide 68

• Block following MAC addresses from connecting to wireless network—

Blocks MAC addresses specified below from connecting to the wireless

network.

• Allow only following MAC addresses to connect to wireless network—

Allows only the MAC addresses specified below to connect to the wireless

network.

STEP 6 Enter the MAC addresses of the endpoints to allow or deny. To see a list of

currently-connected clients, click Wireless Clients List.

STEP 7 Click Save.

Configuring Wi-Fi Multimedia

Wi-Fi Multimedia (WMM) is used to prioritize different types of traffic. You can

configure QoS settings to provide different priority to different applications, users,

or data flows, or to guarantee a certain level of performance to a data flow.

To configure WMM:

STEP 1 Choose Wireless > Basic Settings.

STEP 2 In the Wireless Basic Settings Table, check the box on the left of the wireless

network you want to configure.

STEP 3 Click Edit WMM.

STEP 4 In the SSID field, select SSID that clients use to connect to the AP.

STEP 5 Check the WMM Enable box to enable WMM based on the IEEE 802.11e standard

for this profile. WMM helps in prioritizing wireless traffic according to four access

categories:

• Voice (highest priority, 4)

• Video (high priority, 3)

• Best effort (medium priority, 2)

• Background (lowest priority, 1)

STEP 6 In the DSCP to Queue table, for each ingress DSCP, you can choose the output

queue for the traffic. The Differentiated Services Code Point (DSCP) field identifies

the data packet and the output queue identifies the output queue in which the

packet is transmitted:

Cisco RV180 Administrator's Manual

Other manuals for Cisco RV180