Viewing the Cisco RV180/RV180W Status
Viewing the Wireless Statistics (Cisco RV180W)
Cisco RV180/RV180W Administration Guide 162
8
Available Access Points Table
This table displays the list of access points currently enabled on the router. It
contains the following information:
Viewing the Wireless Statistics (Cisco RV180W)
The Wireless Statistics page shows a cumulative total of relevant wireless
statistics for the radio on the device.
To view wireless statistics:
STEP 1 Choose Status > Wireless Statistics.
STEP 2 Click Stop.
STEP 3 In the Poll Interval field, enter the number of seconds the router waits before
updating the information on this page.
STEP 4 Click Start to restart automatic refresh at the specified poll interval.
The Wireless Statistics page displays this information:
SSID The SSID (name) of the access point.
MAC Address The MAC address of the SSID.
Security The security setting for the SSID.
Encryption The encryption type used by the SSID.
Authentication The authentication type used by the SSID.
SSID The name of the wireless network.
Packets The number of received/sent wireless packets
reported to the radio over all configured and active
SSIDs.
Bytes The number of received/sent bytes of information
reported to the radio, over all configured APs.