Cisco SF 302-08MP User Manual

Configuring Multicast Forwarding
Defining Unregistered Multicast Settings
Cisco Small Business 300 Series Managed Switch Administration Guide 163
14
IGMP or MLD messages are not forwarded to the ports are defined as forward all.
NOTE The configuration affects only the ports that are members of the selected VLAN.
To define Forward All Multicast:
STEP 1 Click Multicast > Forward All. The Forward All Page opens.
STEP 2 Define the following:
• VLAN ID equals to—The VLAN ID the ports/LAGs are to be displayed.
• Interface Type equals to—Define whether to display ports or LAGs.
STEP 3 Click Go. The status of all ports/LAGs are displayed.
STEP 4 Select the interface that is to be defined as forward all by using the following
methods:
• Static—The port receives all multicast streams.
• Dynamic—(not applicable).
• Forbidden—Ports cannot receive any Multicast streams, even if IGMP/MLD
snooping designated the port to join a Multicast group.
• None—The port is not currently a Forward All port.
STEP 5 Click Apply. The switch is updated.
Defining Unregistered Multicast Settings
Multicast frames are generally forwarded to all ports in the VLAN. If IGMP/MLD
Snooping is enabled, the switch learns about the existence of Multicast groups,
and monitors which ports have joined which Multicast group. Multicast groups can
also be statically configured. Multicast groups that were either dynamically
learned or statically configured, are considered registered. This enables the

Cisco SF 302-08MP Specifications

General

Brand	Cisco
Model	SF 302-08MP
Category	Switch
Language	English