Getting Started
Window Navigation
Cisco Small Business 300 Series Managed Switch Administration Guide 7
1
Apply Click to apply changes to the Running Configuration on the
switch. If the swtich is rebooted, the Running Configuration
is lost, unless it is saved to the Startup Configuration file
type or another file type. Click Save to display the Copy/
Save Configuration Page and save the Running
Configuration to the Startup Configuration file type on the
switch.
Cancel Click to reset changes made on the page.
Clear All
Interfaces
Counters
Click to clear the statistic counters for all interfaces.
Clear Interface
Counters
Click to clear the statistic counters for the selected
interface.
Clear Logs Clears log files.
Clear Table Clears table entries.
Close Returns to main page. If there are changes that were not
applied to the Running Configuration, a message is
displayed.
Copy Settings A table typically contains one or more entries containing
configuration settings. Instead of modifying each entry
individually, it is possible to modify one entry and then
copy it to multiple entries, as described below:
1. Select the entry to be copied. Click Copy Settings to
display the popup.
2. Enter the destination entry numbers in the to field.
3. Click Apply to save the changes and click Close to
return to the main page.
Delete Select the entry in the table to be deleted and click Delete
to remove entries from a table. The entry is deleted.
Details Click to display the details associated with the entry
selected on the main page.
Management Buttons (Continued)
Button Name Description
To Next Page
Loading...
Need help?
General
