General Administrative Information and Operations
System Information
Cisco Small Business 300 Series Managed Switch Administration Guide 43
5
System information:
• System Description—A description of the system.
• System Location—Physical location of the switch. Click Edit to go the
System Settings Page to enter this value.
• System Contact—Name of a contact person. Click Edit to go the System
Settings Page to enter this value.
• Host Name—Name of the switch. Click Edit to go the System Settings
Page to enter this value. By default, the switch hostname is composed of
the word switch concatenated with the three least significant bytes of the
switch MAC address (the six furthest right hexadecimal digits).
• System Object ID—Unique vendor identification of the network
management subsystem contained in the entity (used in SNMP).
• System Uptime—Time that has elapsed since the last reboot.
• Current Time—Current system time.
• Base MAC Address—Switch MAC address.
• Jumbo Frames—Jumbo frame support status. This support can be
enabled or disabled by using the Port Settings Page.
Hardware and firmware version information:
• Model Description—Switch model description.
• Serial Number—Serial number.
• PID VID—Part number and version ID.
• Firmware Version (Active Image)—Firmware version number of the active
image.
• Firmware MD5 Checksum (Active Image)—MD5 checksum of the active
image.
• Firmware Version (Non-active Image)—Firmware version number of the
non-active image. .
• Firmware MD5 Checksum (Non-active Image)—MD5 checksum of the
non-active image.
• Boot Version—Boot version number.
• Boot MD5 Checksum—MD5 checksum of the boot version.
To Next Page
Loading...
Need help?
General
