336
AXLES
SUSPENSION
STEERING
AXLE GEOMETRY
B3CP097D
Measuring front height Measuring rear height
Tools : [1] Gauge for measuring the the wheel radius, 4 bolts :4300-T
Z1 = Measuring zone underneath the front subframe Z2 = Measuring zone underneath the rear sill.
Measure the radius of the front wheel R1/Calculate dimension H1 = R1 – L1 Measure the radius of the rear wheel R2/Calculate dimension H2 = R2 + L2
Value at reference All types
CRD vehicles (*)
Value at reference All Types (except Entreprise CRD vehicles
height (except CRD) (*) height Entreprise and CRD) (*) vehicles (*)
(+ 10 - 8 mm) L1 = 144 mm L1 = 124 mm (+ 12 - 10 mm) L2 = 68 mm L2 = 48 mm L2 = 88 mm
(*) = CRD: Difficult road conditions: definition for a type of vehicle with axles and suspension designed for driving on rough roads.
Compress the suspension to obtain the calculated values.
The height difference between the two axle dimensions should be less than 10 mm.
To Next Page
Loading...
Need help?
General
