tion
Enabled — Enables the System Capabilities TLV on the port.
Disabled — Disables the System Capabilities TLV on the port.
2. Define the Unit, From Port, To Port, Port Description, System Name, System Description and System Capabilities
fields.
3. Click
. The LLDP basic TLV settings are defined, and the device is updated.
Defining LLDP Dot3 TLV Settings
The LLDP Dot3 TLVS Setting Page displays LLDP Dot3 TLV port information and contains parameters for configuring
LLDP Dot3 TLV port settings.
1. Click L2 Features > LLDP > LLDP Dot3 TLVS Setting. The LLDP Dot3 TLVS Setting Page opens:
Figure 0–31 LLDP Dot3 TLVS Setting Page
The LLDP Dot3 TLVS Setting Pag
e contains the following fields:
Field Descri
tion
Unit
Indicates the stacking member for which the LLDP dot3 TLV port settings are
defined.
From Port
Defines the first port in a consecutive sequence of ports.
To Port
Defines last port in a consecutive sequence of ports.
MAC/PHY Configuration Status
Specifies whether the MAC/PHY Configuration Status is enabled on the port.
The possible field values are:
Enabled — Enables the MAC/PHY Configuration Status on the port.
Disabled — Disables the MAC/PHY Configuration Status on the port.
2. Define the Unit, From Port, To Port and MAC/PHY Configuration Status fields.
3. Click
. The LLDP Dot3 TLV settings are defined, and the device is updated.
To Next Page
Need help?
General
