DGS-3100 Series Gigabit Stackable Managed Switch User Manual
52
Defining SNMP Users
The SNMP User Table Page enables assigning system users to SNMP groups and defining the user authentication method.
To assign system users:
1. Click Configuration > SNMP Settings >SNMP User Table. The SNMP User Table Page opens:
Figure 0-145 SNMP User Table Page
The SNMP User Table Page contains the following fields:
Field Description
User Name
Defines the SNMP user name included in the SNMP user group.
Group Name
Defines the SNMP group and assigned to a user.
SNMP V3 Encryption
Defines the SNMPv3 user authentication method. The possible field values are:
None —No user authentication is used.
Password — Provides user authentication via the HMAC-SHA-96 authentication
level password or HMAC-MD5-96 password.
Key — Provides user authentication via the HMAC-MD5 algorithm or the HMAC-
SHA-96 authentication level.
Auth-Protocol by Password
Selects the authentication password type used to authenticate users. The possible field
values are:
MD5 — Defines that HMAC-MD5-96 password is used for authentication.
SHA — Defines that HMAC-SHA-96 authentication level password is used for
authentication.
Password
Defines the password used for authentication. (1-32 digits).
Confirm Password
Confirms the password used for authentication. (1-32 digits).
To Next Page
Need help?
General
