DGS-3100 Series Gigabit Stackable Managed Switch User Manual
Field Description
VLAN Name
Defines the name of the Voice VLAN
802.1p Priority
Prioritization that groups packets into various traffic classes
Remark 802.1p Priority
Specifies whether 802.1p Priority replaces the 802.1p Priority written in the packet
(Enable) or used only for forwarding within the device (Disable).
Voice VLAN Aging Time
Indicates the amount of time after the last IP phone's OUI was received on a port,
after which this port will be removed from the Voice VLAN. The default time is one
day.
The field format is Day, Hour, Minute. The aging time starts after the MAC Address
is aged out from the Dynamic MAC Address table. The default time is for this is 300
seconds.
2. To configure Voice VLAN Global Settings, select Create in the Voice VLAN Setting field, select a VID, enter a
VLAN Name.
3. To configure the 802.1p Priority, select the priority in the 802.1p Priority field and enable or disable Remark
802.1p Priority.
4. To configure Voice VLAN Aging, define the Voice VLAN Aging Time field.
5. Click
. The Voice VLAN is created, its global settings are defined, and the device is updated.
Defining Voice VLAN Port Settings
The Voice VLAN Port Setting Page contains fields for assigning ports or LAGs to the voice VLAN.
1. Click L2 Features > Voice VLAN > Port Settings. The Voice VLAN Port Setting Page opens:
Figure 0–41 Voice VLAN Port Setting Page
The Voice VLAN Port Setting Page contains the following fields:
12
3
To Next Page
Need help?
General
