D-Link DGS-3100 SERIES User Manual

DGS-3100 Series Gigabit Stackable Managed Switch User Manual
Figure 5-8 SSL Configuration Settings Page
The SSL Configuration Settings Page contains the following fields:
Field Description
SSL Status
Indicates if SSL is enable on the device. The possible field values are:
Enabled — Indicates SSL is enabled on the device.
Disabled — Indicates SSL is disabled on the device. (This is the default value.)
Ciphersuite
Indicates the Ciphersuite. The possible field values are:
RSA with RC4 128 MD5 —Combines the RSA key exchange, stream cipher RC4
encryption with 128-bit keys and the MD5 Hash Algorithm.
RSA with 3DES EDE CBC SHA — This ciphersuite combines the RSA key exchange, CBC
Block Cipher 3DES_EDE encryption and the SHA Hash Algorithm.
RSA EXPORT with RC4 40 MD5 — This ciphersuite combines the RSA Export key
exchange and stream cipher RC4 encryption with 40-bit keys.
Status
Indicates if the selected Ciphersuite is enable or disabled for SSL. The possible field values
are:
Enable — Enables the Ciphersuite for SSL.
Disable — Disables the Ciphersuite for SSL.
2. Enable or disable the SSL status in the SSL Status field.
3. Click
. The SSL status is defined, and the device is updated.
15
7

D-Link DGS-3100 SERIES Specifications

General

Type	Managed
Layer	Layer 2+
Ports	10/100/1000BASE-T
SFP Ports	2 or 4 (depends on the model)
Additional SFP Ports	No
VLANs	Yes
Stacking	Yes, Physical Stacking
QoS	Yes
Jumbo Frame Support	Up to 9K bytes
Management	Web-based
Operating Temperature	0°C to 40°C
Humidity	10% to 90% non-condensing
Standards Compliance	IEEE 802.3, IEEE 802.3u, IEEE 802.3ab, IEEE 802.3z, IEEE 802.3x, IEEE 802.1D, IEEE 802.1w, IEEE 802.1s, IEEE 802.1Q, IEEE 802.1p
Model	DGS-3100 SERIES
Storage Temperature	-40°C to 70°C