Danfoss VLT CDS 303 User Manual

6.12 Par. Group 15 - Drive Information
6.12.1 15-** Drive Information
Parameter group containing compressor drive information
such as
•
operating data
•
hardware conguration
•
software versions
6.12.2 15-0* Operating data
Parameter group containing operating data, e.g. counters.
15-00 Operating hours
Range: Function:
0 h* [0 - 2147483647 h] View how many hours the frequency
converter has run. The value is saved
when the frequency converter is
turned o.
15-01 Running Hours
Range: Function:
0 h* [0 -
2147483647 h]
View how many hours the motor has run.
Reset the counter in
parameter 15-07 Reset Running Hours
Counter. The value is saved when the
frequency converter is turned o.
15-02 kWh Counter
Range: Function:
0 kWh* [0 -
2147483647
kWh]
Registering the power consumption of
the motor as a mean value over one
hour. Reset the counter in
parameter 15-06 Reset kWh Counter.
15-03 Power-ups
Range: Function:
0 * [0 - 2147483647 ] View the number of times the frequency
converter has been powered up.
15-04 Over Temps
Range: Function:
0 * [0 - 65535 ] View the number of frequency converter
temperature faults which have occurred.
15-05 Over Volts
Range: Function:
0 * [0 - 65535 ] View the number of frequency converter
overvoltages which have occurred.
15-06 Reset kWh Counter
Option: Function:
[0] Do not reset No reset of the kWh counter is desired.
[1] Reset counter Press [OK] to reset the kWh counter to zero
(see parameter 15-02 kWh Counter).
NOTICE!
The reset is carried out by pressing [OK].
15-07 Reset Running Hours Counter
Option: Function:
[0] Do not
reset
[1] Reset
counter
Select [1] Reset and press [OK] to reset the
Running Hours counter to zero (see
parameter 15-01 Running Hours). This parameter
cannot be selected via the serial port, RS-485.
Select [0] Do not reset if no reset of the Running
Hours counter is desired.
15-08 Number of Starts
Range: Function:
[0 - 4294967295] View the total number of starts performed
since power-on. The value is cleared to zero
at power-up.
15-09 Number of Auto Resets
Range: Function:
[0 - 4294967295] View the total number of auto resets
performed since power-on. The counter is
cleared to zero at power-up.
Parameter Descriptions Operating Instructions
MG34M422 Danfoss A/S © Rev. 2013-07-03 All rights reserved. 105
6
6

Danfoss VLT CDS 303 Specifications

General

Brand	Danfoss
Model	VLT CDS 303
Category	DC Drives
Language	English