DataCard SR200 User Manual

20 Using the Printer and Laminator
Checking the Laminator Connection
WhenusingtheLM200orLM300laminator,makesurethat:
 Theprinterandlaminatorarealignedattheinfraredports,usingthejoiningplate.
 Thepowercordissecurelyconnectedtothelaminatorandanappropriategroundedpower
source.
 Suppliesareloadedandthelaminatordoorisclosedsecurely.
Powering On the Laminator
WhentheLM200orLM300laminatorisused,poweronthelaminator
beforepoweringontheprinter.
1. Pressthelaminatorpowerswitch.
2. Makesurethatthelaminatorisreadybeforeproceedingtopower
ontheprinter:
 TheprinterLCDpaneldisplaysInitializingandthebluestatus
indicatorlightblinks.
 Prehea tingdisplaysontheprinterLCDpanelforapproximately
fourminuteswhiletheheatrollerwarmstooperating
temperature.
 Thelaminatormaterialinitalizesautomatically.
 TheprinterLCDpaneldisplaysReadyandthebluestatuslightis
litwhenthelaminatorisreadytoprocesscards.
BlueStatusLight
PowerSwitch

DataCard SR200 Specifications

General

Brand	DataCard
Model	SR200
Category	Printer
Language	English