2D Global Features Enter/Exit Programming Mode
Product Reference Guide
197
QR Code Set Length 2
This feature specifies one of the bar code lengths for QR Code Length Con-
trol
. Length 2 is the maximum label length if in Variable Length Mode, or
the second fixed length if in Fixed Length Mo
de. Characters can be set from
0001 to 7,089 characters in increments of 0001 (pad with zeroes).
See
page 268 for detailed instructions on setting this feature.
Select QR Code Length 2 Setting
To configure this feature, scan the ENTER/EXIT
PROGRAMMING MODE bar code above, then the bar
code at left followed by the digits from the Alphanu-
meric characters in
Appendix D, Keypad
repre-
senting your desired character(s). End by scanning
the ENTER
/EXIT bar code again.
Make a mistake? Scan the CANCEL bar code t
o
abort
and not save the entry string. You can then start
again at the beginning.
Length 2 is 7,089 Characters
MICRO QR CODE
Micro QR Code Enable/Disable
Enables/disables the ability of the reader to decode Micro QR Code labels
DEFAULT
To Next Page
Loading...
Need help?
General
Weight and Dimensions
