Datalogic PowerScan PM9500 User Manual

Product Reference Guide 49
DATA FORMAT
GLOBAL PREFIX/SUFFIX (HEADER/TERMINA-
TOR)
on page 50
GLOBAL AIM ID on page 51
LABEL ID starting on page 55
•Label ID: Pre-Loaded Sets
•Individually Set Label ID
•Label ID Control
•Label ID Symbology Selection − 1D Symbol-
ogies
•Label ID Symbology Selection − 2D Symbol-
ogies
CASE CONVERSION on page 61
CHARACTER CONVERSION on page 61
CAUTION
It is not recommended to use these features with IBM inter-
faces.
The features in this chapter can be used to build specific user-defined data
into a message string. See “References” starting on
page 269 for more
detailed instructions on setting these features.

Datalogic PowerScan PM9500 Specifications

General

Type	Handheld bar code reader
Wavelength	680 nm
Sensor type	-
Scanner type	1D/2D
Tilt reading angle	0 - 360 °
Pitch reading angle	-40 - 40 °
Light levels (direct sunlight)	0 - 100000 lx
2D (matrix & stacked) barcodes supported	Aztec Code, Data Matrix, GS1 DataBar Expanded Stacked, GS1 DataBar Stacked Omnidirectional, MaxiCode, Micro QR Code, MicroPDF417, PDF417, QR Code
Wireless range	150 m
Operating frequency	910 MHz
Standard interfaces	USB, RS-232, RS-485
Connectivity technology	Wireless
Certification	IEC 60825 Class 2 IEC 62471 Class 1 LED
Product color	Black, Yellow
LED indicators	Yes
Protection features	Shock resistant
International Protection (IP) code	IP65
Sustainability certificates	RoHS
Storage temperature (T-T)	-40 - 70 °C
Operating temperature (T-T)	-20 - 50 °C
Operating relative humidity (H-H)	0 - 95 %
Battery life	10 h
Charging time	4 h
Input voltage	12 V
Battery capacity	2150 mAh
Power consumption	150 mA
Power source type	Battery
Cables included	No

Weight and Dimensions

Depth	74 mm
Width	110 mm
Height	212 mm
Weight	380 g