Datalogic PowerScan PM9500 User Manual

Product Reference Guide 207
WIRELESS FEATURES
This section provides options and programming related to the reader’s wire-
less communication features. Reference
Appendix C, for a listing of standard
factory settings.
WIRELESS BEEPER FEATURES starting on page 209
•"Good Transmission Beep" on page 209
•"Beep Frequency" on page 209
•"Beep Duration" on page 210
•"Beep Volume" on page 211
•"Disconnect Beep" on page 211
•"Docking Beep" on page 212
•"Leash Alarm" on page 212
CONFIGURATION UPDATES starting on page 214
•Automatic Configuration Update on page 214
•Copy Configuration to Scanner on page 214
•Copy Configuration to Base Station on page 214
BATCH FEATURES starting on page 215
•Batch Mode on page 215
•Send Batch on page 215
•Erase Batch Memory on page 216
•RF Batch Mode Transmit Delay on page 216
DIRECT RADIO AUTOLINK starting on page 217
RF ADDRESS STAMPING starting on page 217
•Source Radio Address Transmission on page 217
•Source Radio Address Delimiter Character on page 218
REAL TIME CLOCK (RTC) CONFIGURATION starting on page
219
•Current Date on page 219
•Current Time on page 219
•Date Tx Format on page 220
•Time Tx Format on page 220
•Date-Time Separator on page 221
•Date-Time Transmission Order on page 222
PBT9500-Only Features
BLUETOOTH SECURITY FEATURES starting on page 223
•Bluetooth Security Mode on page 224
•Bluetooth PIN Code on page 224
•Select PIN Code Length on page 224
•Set PIN Code on page 225

Datalogic PowerScan PM9500 Specifications

General

Type	Handheld bar code reader
Wavelength	680 nm
Sensor type	-
Scanner type	1D/2D
Tilt reading angle	0 - 360 °
Pitch reading angle	-40 - 40 °
Light levels (direct sunlight)	0 - 100000 lx
2D (matrix & stacked) barcodes supported	Aztec Code, Data Matrix, GS1 DataBar Expanded Stacked, GS1 DataBar Stacked Omnidirectional, MaxiCode, Micro QR Code, MicroPDF417, PDF417, QR Code
Wireless range	150 m
Operating frequency	910 MHz
Standard interfaces	USB, RS-232, RS-485
Connectivity technology	Wireless
Certification	IEC 60825 Class 2 IEC 62471 Class 1 LED
Product color	Black, Yellow
LED indicators	Yes
Protection features	Shock resistant
International Protection (IP) code	IP65
Sustainability certificates	RoHS
Storage temperature (T-T)	-40 - 70 °C
Operating temperature (T-T)	-20 - 50 °C
Operating relative humidity (H-H)	0 - 95 %
Battery life	10 h
Charging time	4 h
Input voltage	12 V
Battery capacity	2150 mAh
Power consumption	150 mA
Power source type	Battery
Cables included	No

Weight and Dimensions

Depth	74 mm
Width	110 mm
Height	212 mm
Weight	380 g