Epson LX-810 Technical Manual

REV.-A
1.1 FEATURES
The LX-8 10/850 is a small, light-weight, low-cost, advanced paper handling printer comparable to the
LX-800. Its main features are:
1.
2.
3.
4.
5.
6.
7.
8.
9.
10.
The
Advanced paper handling: Auto
backout and cut sheet loading
Expanded
ESC/P-code printing, implemented as a standard feature
Printing speeds: 200
cps (high speed draft)
150
CpS (dri~ft 10 cpi)
180
CpS (dri~ft 12 cpi)
Optional 8100 series interface
Clear, easy-to-read printing with a standard EPSON font
Two built-in NLQ (Near Letter Quality) fonts (Roman and Saris Serif)
Control panel switch selection of Draft, Roman, or Saris Serif font
Control panel switch selection of normal or condensed printing
Control panel mode settingd are saved in non-volatile memory
Easy handling of cut sheets with
the optional cut-sheet feeder (CSF)
LX-8 10/850 is equipped with the standard EPSON 8-bit parallel interface. Various interface options
enable users to print data from a variety
of computers. Table 1-1 lists the interface options, Table 1-2
lists the optional units available for the LX-8 10/850, and Figure 1-1 shows an exterior view of the
LX-8 10/850.
Tablo 1-1. Interface Options
I
Model
Description
Enter faceboard
Intelligent serial interface board
Intelligent
IE:EE-488 interface board
NOTE: Refer to the “Optional Interface Technical Manual” for details.
Table 1-2. Optional Units
Model
I
Description
C8061 2* Single bin cut sheet feeder
C80006”
Pull tractor unit
8310 Roll paper
holder
8750
Ribbon cartridge (Black)
1-1

Epson LX-810 Specifications

General

Brand	Epson
Model	LX-810
Category	Printer
Language	English