Setting Item Setting Description
Power On Cleaning
On
*
This is only available in White ink mode.
On: Cleaning is performed when the initial operation is complete after the
power is turned on and before starting printing for the first time, and then
cleaning is also done periodically after that.
We recommend setting this to On because print quality may decline due
to clogged nozzles and ink sedimentation unless the White ink is cleaned
periodically. Cleaning may not be done if the power is turned off for a very
short time before being turned back on. The cleaning time varies
depending on the length of time the printer has been turned off, and may
take up to 20 minutes.
Off
Date & Time YY/MM/DD
HH:MM
MM/DD/YY
HH:MM
Set the printer's built-in clock. The time is used when printing the job log
and printer status.
Language Japanese Select the language used on the control panel's screen.
English
French
Italian
German
Portuguese
Spanish
Dutch
Russian
Korean
Chinese
Unit: Length
m
*
Select the unit of length used on the control panel's screen and when
printing patterns.
ft/in
Alert Sound Setting
On
*
Enable (On) or disable (Off) the buzzer that sounds when an error occurs.
Off
Sleep Mode Off The printer enters sleep mode automatically when there are no errors, no
print jobs being received, and no control panel or other operations are
performed for the selected period. Use this option to choose the period
before the printer enters sleep mode. When the printer enters sleep mode,
the control panel's screen turns off and the internal motors and other parts
switch off to consume less power. The screen display returns if a button is
pressed on the control panel; however, the panel turns off again if no
operations are performed for 30 seconds. The printer recovers completely
when hardware operations are performed such as when print job data is
received.
5 to 180
minutes later
(30
*
)
SC-F2100 Series User's Guide
Using the Control Panel Menu
102
To Next Page
Loading...
Need help?
General