7.3.8.MakingRemoteClipsLocalinaPlaylist
Making Remote Clips Automatically Local
Principles
• When the prerequisites are met, remote clips can be made automatically local in the following cases:
◦ When remote clips are added to a loaded local playlist, the remote clips are automatically copied
locally.
◦ When a local playlist containing remote clips is being loaded, remote clips are automatically
copied locally.
• The remote clips are copied locally on the server page set as Protocol Receive Page on Multicam
side.
• Remote clips added to a local playlist which is not loaded are not copied yet.
• No local copy occur when a remote playlist is loaded.
Prerequisite
• The Make Local Auto Multicam parameter must have been set to Yes on the XT-VIA Server side.
Making Remote Clips Manually Local
Principles
A Make Local function is available from the Remote Panel console when a local playlist is loaded in
Playlist Edit mode and contains remote clips.
• The remote clips are copied locally on the server page set as Protocol Receive Page on Multicam
side.
• Remote clips added to the playlist while it is loaded, those clips are not automatically copied locally.
The Make Local operation must be repeated.
• Remote clips added to a local active playlist which is not loaded are not copied.
• A remote clip inserted several times in a playlist will be copied locally only once and will refer the
same local LSM ID.
How to Make Remote Clips Manually Local
• Press Make Loc
During the Make Local process, the Make Loc key display has a blinking yellow background.
USER MANUAL
LSM-VIA |7. Working with Playlists| 165
To Next Page
Need help?
General