8.3.4.LoadingMediafromtheShotbox
The Shotbox allows you to quickly load or play a local or remote media (clip or playlist) you have
previously added to the Shotbox.
How to Load Media Mapped on the Shotbox
1. Open the Shotbox by pressing the Shotbox key: .
2. Tap the tab of the page where the media you want to load is stored.
3. Tap the box corresponding to the media you want to load.
If a remote media had been mapped before the corresponding server went disconnected, the
box is still displayed but is not available.
The corresponding media is loaded.
Loading Behavior
• A mapped playlist is loaded in PGM+PRV, unless the Remote Panel is configured in Multi-PGM mode
with a single controlled PGM.
• A mapped clip CAMangle is loaded on the smallest controlled PGM.
If you control more than one channel, other CAM angles from the same clip are loaded on the
additional controlled channels.
USER MANUAL
LSM-VIA |8. Operations on Network| 253
To Next Page
Loading...
Need help?
General
