If filters had been defined on remote record trains before the corresponding server went
disconnected, filter boxes are still displayed but not available.
The box of the loaded record train is highlighted (blue by default). If a colored filter had been associated
with the record train, the box is colored accordingly and highlighted.
Loading Behavior
• If the smallest controlled PGM is LIVE, the record train is loaded LIVE (5 seconds back in time for
remote record trains).
• If the smallest controlled PGM is located at a past TC, the record train is loaded on the same TC.
• The current speed of the smallest controlled PGM is taken into account when loading a record train.
• If the record train being loaded does not have material for the given TC, the record train is loaded
LIVE.
• If the record train being loaded has several times the same TC, the record train is loaded on the TC
recorded last.
• E/E will trigger a Live command on the controlled record trains. If one of them is a remote one, E/E
does not go back to the local server : it performs the Live command on the remote record train.
• Camera buttons (A, B, C...) remain plugged to the local server if a remote record train has been
loaded on the smallest controlled PGM.
8.2.4.LoadingBacktheLocalRecordTrain
(BacktoLocal)
Principles
When remote trains have been loaded on the player channels, you can quickly load the local record
trains.
244| January 2022 | Issue 1.4.G
To Next Page
Loading...
Need help?
General
