EVS LSM-VIA User Manual

1.2. StartingLSM-VIA
The LSM-VIA configuration is described in the Installation and Configuration manual.
Do not forget to configure LSM-VIA and the running configuration on the EVS server before
you start using LSM-VIA after an initial installation or an update.
How to Start LSM-VIA
Starting LSM-VIA consists in launching the application on both the LSM-VIA workstation (LSM-Viewer)
and the LSM-VIA Remote Panel.
1. Double-click the LSM-VIA icon on the desktop of the LSM-VIA workstation:
2. Switch on the Remote Panel using the power switch at the back of the Remote Panel, above the
power supply.
3. On the Remote Panel touchscreen, in the IPAddress field, enter the IP address of the LSM-VIA
workstation.
When you enter three digits for an octet, the focus shifts directly to the next octet. Otherwise, you
can tap the octet you want to edit.
4. In the same way, enter the IPaddress, subnet mask and default gateway for the LSM-VIA Remote
Panel.
USER MANUAL
LSM-VIA |1. Introduction| 3

EVS LSM-VIA Specifications

General

Brand	EVS
Model	LSM-VIA
Category	Music Mixer
Language	English