EVS LSM-VIA User Manual

To clear the LSM ID field: press on the console or tap on the
touchscreen.
4. Validate your action: press on the console or tap on the touchscreen.
Clips:
When the clip LSM ID does not exist, the field displaying the LSM ID turns red and the Remote Panel
beeps.
When the LSM ID exists, the clip angles are loaded on the controlled play channels taking the controlled
PGMs and preferred CAMs into account.
Playlists:
If the recalled playlist is empty, you have the possibility
• to immediately set it as the active playlist.
• to copy the currently active playlist into the recalled playlist and set this latter as active.
The recalled playlist becomes the active playlist, provided that it is not a remote playlist.
To leave the Recall screen without recalling a media
• tap on the upper left corner, or
• press on the Remote Panel.
8.1.4.RecallingMediabyLSMIDfromtheLSM-
VIAViewer
Introduction
From the LSM-VIAViewer, you can easily load a local or remote train or clip, or you can make a playlist
active by simply typing its LSM ID.
Writing Rules for a Train LSM ID
• to load a local train: type the LSMIDwithout network number, e.g. b.
• to load a remote train: type the LSMIDand the network number of a remote server, e.g. b/03 or b/3.
234| January 2022 | Issue 1.4.G

EVS LSM-VIA Specifications

General

Brand	EVS
Model	LSM-VIA
Category	Music Mixer
Language	English