The Server field of the App bar gives indication on the local or the remote server connected to. A purple
background highlights the remote state of the selected server.
In the Clip grid, the selection is blue for local clips, and purple for remote clips.
See section "The Clip Grid on LSM-VIA Viewer" on page 65.
How to Connect Back to Local Server
You can quickly connect to the local server when you are connected to a remote server.
• From the console, press + .
• From LSM-VIAViewer, press + .
It goes back to the same page/bank where you were before the connection to the remote server.
The Clip grid no longer shows the remote clips.
If you are connected to a remote server and remote trains are loaded, the Back to Local
operation will
• not only connect back to the local server,
• but also reload the local trains.
8.1.3.RecallingClipsorPlaylistsbyLSMIDfrom
theRemotePanel
The Recall function allows you to quickly find back a local or remote clip or playlist by selecting directly
its LSM ID, without having to go back to the right page and bank.
1. Select the Recall function.
+
232| January 2022 | Issue 1.4.G
To Next Page
Loading...
Need help?
General
