Flatten Playlist
This button is used to flatten the active playlist to the local server.
See section "Flattening a Playlist" on page 168.
Reset Cam
The Reset Cam function allows you to reset the default camera assignment on the controlled PGM.
See section "Changing the Camera Assignment to a PGM" on page 46.
Goto TC
The Goto TC (timecode) function allows you to jump to a given timecode in the train loaded on the
smallest controlled PGM.
See section "Playing and Browsing a Record Train" on page 51.
Search TC Configuration
The Search TC Configuration function allows you to configure the Search by TCoperation.
From the Search TCscreen, you will be able to set if you want to search for all the clips, trains, or clips
and trains.
Note that, from this screen, you can also perform a search on a particular timecode.
See section "Searching for Clips or Trains by Timecode" on page 85.
Last Search TC
The Last Search TC function allows you to execute the last Search TC operation you have done and to
go back to the result that was loaded when the Browse mode was previously active.
Assignable Shortcut Buttons (5)
This area provides buttons which can be mapped to predefined functions and therefore quickly give
access to up to 6 primary functions without the SHIFT button and to up to 6 secondary functions
with the SHIFT button .
See section "Commands from the Assignable Shortcut Keys" on page 37.
5.3.ChangingtheCameraAssignmenttoa
PGM
Default Camera Assignment to PGMs
By default, the cameras (record trains) are assigned to PGMs as follows:
• In PGM+PRV, CAM A is assigned to PGM and CAM Bis assigned to PRV.
• In Multi PGM, CAM A is assigned to PGM1, CAMB to PGM 2, and so on.
46| January 2022 | Issue 1.4.G
To Next Page
Loading...
Need help?
General
