Channel Control in PRV-Only Mode
How to Control PRV-Only Mode
• To control only the PRV, press the PRV key on the right operational block:
Display on Remote Panel with PRV Control
• The OSD displays LEVER CTRL on the PGM monitor and FULL CTRL on the PRV monitor.
• On the right operational block, PRV is displayed on a yellow background and the corresponding PRV
key blinks red.
Channel Control in All PGM Mode
How to Control All PGMs
• When you enter the Multi-PGM control mode, all PGM channels are controlled by default.
• When you are in one PGM control, press the All key on the left operational block to regain the control
of all PGMs:
USER MANUAL
LSM-VIA |3. Defining Channel Control| 23
To Next Page
Loading...
Need help?
General
