GLOBAL OPENING (IF EQUIPPED)
WHAT IS GLOBAL OPENING
You can use the remote control to open
the windows with the ignition off.
USING GLOBAL OPENING
1. Press and release the unlock button on
the remote control.
2. Press and hold the unlock button on
the remote control.
3. Release the button when the windows
start to open.
Press the lock or the unlock button on the
remote control to stop global opening.
Note: You can use global opening for a
short period of time when you unlock your
vehicle using the remote control.
SWITCHING GLOBAL OPENING ON
AND OFF
1. From the settings menu, press Vehicle.
See Center Display (page 457).
2. Press Windows.
3. Switch Global open on or off.
WINDOW BOUNCE-BACK
WHAT IS WINDOW BOUNCE-BACK
The window stops and reverses if it detects
an obstruction when closing.
OVERRIDING WINDOW BOUNCE-
BACK
WARNING: If you override
bounce-back, the window does not
reverse if it detects an obstacle. Take
care when closing the windows to avoid
personal injury or damage to your
vehicle.
1. Close the window until it reaches the
point of resistance and let it reverse.
2. Lift and hold the window control switch
within two seconds to override
bounce-back and close the window.
Bounce-back is now disabled and you
can close the window manually.
Note: The window goes past the point of
resistance and you can fully close it.
Note: If the window does not close, have
your vehicle checked as soon as possible.
LOCKING THE REAR WINDOW
CONTROLS
WARNING: When children and pets
are in the rear seat, use the power
window lockout button to prevent
accidental operation of the power
windows.
Press the window control switch
to lock or unlock the rear window
controls. It illuminates when you
lock the rear window controls.
119
Explorer (CTW) Canada/Mexico/United States of America, enUSA, Edition date: 202401, DOM
Windows
To Next Page
Loading...
Need help?
General
