Stability Control and Traction Control with Roll Stability Control
Traction Control
System
3
Electronic
Stability
Control
3
Roll Stability
Control
3
Stability Control
OFF Light
Enabled
Enabled
3
EnabledIlluminated
during bulb
check
Default at start-
up
Disabled
1
Enabled
3
EnabledIlluminatedButton pressed
momentarily
DisabledDisabledEnabledIlluminatedButton pressed
and held for 5 -
15 seconds
Disabled
1
DisabledDisabledIlluminatedButton not
pressed and
transfer case is
switched to 4x4
Low or put into
Trail.
1
The Traction Control system can still be enabled but with tighter or looser thresholds.
2
When you press and hold the button, a progress bar will display to show the button hold
time progress.
3
Functions can vary depending on what selectable drive mode the vehicle is currently in.
SWITCHING STABILITY
CONTROL ON AND OFF -
POLICE
Stability Control turns on each time you
switch the ignition on.
Shifting the transmission into reverse (R)
will disable the system.
You can switch the traction control system
off or on independently. See Switching
Traction Control On and Off (page 235).
239
Explorer (CTW) Canada/Mexico/United States of America, enUSA, Edition date: 202401, DOM
Stability Control
To Next Page
Loading...
Need help?
General
