LANE CHANGE ASSIST – TROUBLESHOOTING
LANE CHANGE ASSIST – INFORMATION MESSAGES
DetailsMessage
The lane you have selected to enter has a
vehicle or obstacle.
Lane busy
A lane is not recognized or available to
perform the requested maneuver.
No lane seen
The requested lane change is being
performed.
Changing lanes
If desired, press the turn signal lever in the
direction indicated by the lane change
suggestion to initiate the lane change.
Lane change possible
Note: The instrument cluster display may
abbreviate or shorten certain messages.
IN-LANE REPOSITIONING
HOW DOES IN-LANE
REPOSITIONING WORK
BlueCruise with in-lane repositioning uses
the vehicle's front and corner radar sensors
together with the front windshield camera
sensor to operate.
Using these sensors, the system
automatically adjusts your vehicle’s
position in the lane based on the current
driving situation.
Note: In-lane repositioning is active only
when BlueCruise is enabled while traveling
on divided highways and when any of the
following occur:
• Passing or being passed by adjacent
lane vehicles in close proximity.
• In a curve.
• Driving in outer lanes.
Note: In certain situations, the vehicle may
bias without showing the indicators.
Note: Keep the front of your vehicle free of
dirt, metal badges or objects. Vehicle front
protectors, aftermarket lights, additional
paint or plastic coatings could also degrade
sensor performance.
Note: The radar sensor has a limited field
of view. It may not detect vehicles at all or
detect a vehicle later than expected in some
situations.
SWITCHING IN-LANE
REPOSITIONING ON AND OFF
1. From the settings menu, press Driver
Assistance. See Center Display (page
457).
2. Press Cruise Control.
3. Press Adaptive Cruise Control.
4. Press Lane Centering.
5. Press In-Lane Repositioning to toggle
the system on or off.
278
Explorer (CTW) Canada/Mexico/United States of America, enUSA, Edition date: 202401, DOM
BlueCruise (If Equipped)
To Next Page
Loading...
Need help?
General
