SWITCHING EVASIVE STEERING
ASSIST ON AND OFF
1. From the settings menu, press Driver
Assistance. See Center Display (page
457).
2. Press Pre-Collision Assist.
3. Press Evasive Steering Assist.
4. Switch the feature on or off.
Note: If you switch automatic emergency
braking off, evasive steering assist turns off.
Note: Automatic emergency braking and
evasive steering assist turn on every time
you start your vehicle.
PRE-COLLISION ASSIST –
TROUBLESHOOTING
PRE-COLLISION ASSIST –
WARNING LAMPS
A telltale illuminates in the
instrument cluster display to
indicate if the system is disabled,
unavailable, or temporarily degraded due
to external environmental conditions.
Note: No action is needed if the telltale
illuminates without a corresponding
information message. See Pre-Collision
Assist Precautions (page 306).
PRE-COLLISION ASSIST – INFORMATION MESSAGES
ActionMessage
You have a blocked sensor due to bad
weather, ice, mud or water in front of the
radar sensor. You can typically clean the
sensor to resolve.
Pre-Collision Assist Not Available Sensor
Blocked
A fault with the system has occurred. Have
your vehicle checked as soon as possible.
Pre-Collision Assist Not Available
311
Explorer (CTW) Canada/Mexico/United States of America, enUSA, Edition date: 202401, DOM
Pre-Collision Assist
To Next Page
Loading...
Need help?
General
