Depending on your vehicle's options, the
system disables auto-start-stop and
optimizes the all-wheel drive system for
enhanced traction.
Use this mode for driving on two-track
trails, loose gravel and mixed uneven
terrain.
Note: The brake over accelerator system is
on in this mode. See Brake Over
Accelerator (page 218).
Note: The electronic locking differential is
available below 25 mph (40 km/h). See
Limited Slip Differential (page 217).
DRIVE MODE CONTROL –
TROUBLESHOOTING
DRIVE MODE CONTROL –
WARNING LAMPS
Some drive modes reduce
traction and stability control
performance and the indicator
illuminates in the instrument cluster.
Note: The system has diagnostic checks
that continuously monitor the system for
proper operation. If a mode is unavailable
due to a system fault, the drive mode
system defaults to normal. When the
system defaults to normal, the driveline
settings remain the same as prior to the
system fault.
DRIVE MODE CONTROL – INFORMATION MESSAGES
DetailsMessage
The system is not available. If it is still not available the next
time you switch the ignition on, the system has malfunc-
tioned. Have your vehicle checked as soon as possible.
Drive Mode Not Available
284
Explorer (CTW) Canada/Mexico/United States of America, enUSA, Edition date: 202401, DOM
Drive Mode Control
To Next Page
Loading...
Need help?
General
