Fronius CMT 4000 Advanced Operating Instructions & Spare Parts

123
EN
Release the Store button.
Briefly press the Store button to exit from the Job menu
The power source switches to the setting selected before the job was copied.
Deleting a job
Stored jobs can also be deleted again. To delete a job, proceed as follows:
Briefly press the Store button to change to the job menu
The first vacant program location is shown.
Using the adjusting dial, select the job to be deleted (the DEL symbol lights up on the
wire diameter button).
Press and hold the wire diameter button “DEL”.
The left-hand display reads "dEL" - the job is deleted.
"PrG" appears on the left-hand digital display to indicate that the job has been deleted.
Release the wire diameter button “DEL”.
Briefly press the Store button to exit from the Job menu
The power source switches to the setting selected before the job was deleted.
5
6
NOTE! Jobs are deleted in the Job menu, not in the job mode process.
1
2
3
4
5

Fronius CMT 4000 Advanced Specifications

General

Brand	Fronius
Model	CMT 4000 Advanced
Category	AC Power Distribution
Language	English