Fronius CMT 4000 Advanced Operating Instructions & Spare Parts

25
EN
General
Device concept
TS 4000 / 5000, TPS 3200 / 4000 / 5000 and TPS
2700 welding plants
The TransSynergic (TS) 4000 and TS 5000
and TransPulsSynergic (TPS) 2700, TPS
3200, TPS 4000 and TPS 5000 power sour-
ces are fully digitised microprocessor-con-
trolled inverter power sources.
The modular design and potential for sys-
tem add-ons ensure a high degree of flexi-
bility. The devices can be adapted to any
specific situation.
The TransPuls Synergic 2700 features an
integral 4-roller drive. There is no longer an
interconnecting hosepack between the
power source and wire-feed unit. Its com-
pact design makes the TPS 2700 particu-
larly suitable for mobile applications.
All models except the TS 4000/5000 are multiprocess devices:
- MIG/MAG welding
- TIG welding with touchdown ignition (excluding CMT power sources)
- Manual metal arc welding
Functional princi-
ple
The central control and regulation unit of the power sources is coupled with a digital signal
processor. The central control and regulation unit and the signal processor control the en-
tire welding process.
During the welding process, the actual data is measured continuously and the device re-
sponds immediately to any changes. Control algorithms ensure that the desired target
state is maintained.
This results in:
- a precise welding process
- exact reproducibility of all results
- excellent weld properties.
Application areas
Warning notices
on the device
US power sources come with extra warning notices affixed to the unit. The warning notices
must NOT be removed or painted over.
VR 70
00
The devices are used in workshops and industry for manual and automated applications
with classical steel, galvanised sheets, chrome/nickel and aluminium.
The integral 4-roller drive, high performance and light weight of the TPS 2700 power
source make it the ideal choice for portable applications on building sites or in repair work-
shops.
The TS 4000/5000 and TPS 3200/4000/5000 power sources are designed for:
- Automobile and component supply industry
- Machinery and rail vehicle construction
- Chemical plant construction
- Equipment construction
- Shipyards, etc.

Fronius CMT 4000 Advanced Specifications

General

Brand	Fronius
Model	CMT 4000 Advanced
Category	AC Power Distribution
Language	English