33
EN
Description of the control panels
General The functions on the control panels are all arranged in a logical way. The various welding
parameters can easily be selected using buttons and can just as easily be
- altered using buttons or the adjusting dial
- displayed on the digital display during welding
The synergic function ensures that all other welding parameters are adjusted when an in-
dividual parameter has been changed.
Safety
Overview "Description of the control panels" is composed of the following sections:
- Standard control panel
- Comfort control panel
- "US" control panel
- TIME 5000 Digital control panel
- CMT control panel
- Yard control panel
- Remote control panel
- CMT remote control panel
- CrNi control panel
- Steel control panel
NOTE! As a result of software updates, you may find that your device has certain
functions that are not described in these operating instructions, or vice versa. Cer-
tain illustrations may also differ slightly from the actual control elements on your
device, but these controls function in exactly the same way.
WARNING! Operating the equipment incorrectly can cause serious injury and
damage. Do not use the functions described until you have thoroughly read and
understood the following documents:
- these operating instructions
- all the operating instructions for the system components, especially the safe-
ty rules
To Next Page
Loading...
Need help?
General
