Fronius CMT 4000 Advanced Operating Instructions & Spare Parts

43
EN
US control panel
US control panel
No. Function
(1) Inch Forward (feeder inching) button
for feeding the wire electrode into the torch-hosepack with no accompanying flow
of gas or current
For information on the various wire feed sequences that are possible when the
welder presses and holds the "Feeder inching" button, see the Fdi parameter in
the Setup menu.
(2) Keylock switch (optional)
When the key is in the horizontal position, the following functions are disabled:
- Selecting the welding process using the Process button(s) (20)
- Selecting the mode using the Mode button(s) (21)
- Selecting the filler metal using the Material button(s) (22)
- Opening the Setup menu using the Store button (25)
- Opening the job correction menu (see “Job mode”)
NOTE! The functions available on the control panel of system compo-
nents are restricted in the same way as those of the control panel on the
power source.
(14)(4)
(1)
(26)
(25)
(5)
(18)
(15)
(12)
(11)
(10)
(3)
(6)
(9)(7)
(16)(8)
(24)
(23)
(22)
(13)
(2)
(19)
(17)
(20)
(21)

Fronius CMT 4000 Advanced Specifications

General

Brand	Fronius
Model	CMT 4000 Advanced
Category	AC Power Distribution
Language	English