Fujitsu ErgoPro e Series User Manual

PC Specialist's Handbook ErgoPro e-, x- and s- Series
First Edition, Release 4 - June 1998 Page 25
Use the LEFT ARROW and RIGHT ARROW keys to move to and highlight the desired menu, and press the
ENTER or DOWN ARROW key to make a selection.
Press ESC to exit each parameter and each level, e.g., to exit a parameter to the main menu level, press ESC
three times.
Setting parameters to default values
Some screens have the option Set default parameters in the bottom left-hand corner . If you want to set all the
parameters in a screen to their respective factory default values, do the following:
1
Move the cursor to Set default parameters.
2
Press ENTER.
3
An entry window appears prompting you to cancel or confirm your choice.
4
Use the UP or DOWN ARROW keys to select Cancel or OK and press ENTER.

Fujitsu ErgoPro e Series Specifications

General

Brand	Fujitsu
Model	ErgoPro e Series
Category	Desktop
Language	English