4.1 Overview
4-3
4.1.2 Handling the Service Types
There are two service types: 4k AMBE and 3.1k Audio.
In normal cases, voice calls will be made via 4k AMBE, and FAX calls will be made via
3.1k Audio.
When you intend to make a call from FB terminal by changing the service type from 4k
AMBE to 3.1k Audio, attach the service code “2*” to the contact number. In this case,
the call rate will be 5 times more expensive than the call rate applied to the calls made
via 4k AMBE.
Table 4.1.4 Numbers for each service type
Service type Number
4k AMBE (TEL), SMS 870-77xxxxxxx
3.1k Audio 870-78yyyyyyy
ISDN UDI/RDI 870-78zzzzzzz
For example;
1) Ship to Land
x When a call is made via 4k AMBE to the number “0798 65 2111” in Japan, the
user will need to dial; the country code + area code + subscriber's number which
is 0081 798 65 2111
x When a call is made via 3.1k Audio (64k ISDN), attach the service code “2*” at
the beginning, and dial; “2* 0081 798 65 2111.”
- When a call is made via 4k AMBE, attach “1*”: “1* 0081 78 631 xxxx”
- When a call is made via 3.1k Audio, attach “2*”: “2* 0081 78 631 xxxx”
- Not attached: A call is made by the service type;
Settings -> Basic settings -> Analog port
2) Land to Ship
When a call is made from land, make the call by dialing the individual phone number in
both cases for 4k AMBE and 3.1k Audio (64k ISDN)
To Next Page
Loading...
Need help?
General
