Furuno FELCOM 500 Service Manual

 7.1 LAN IP address
7-15
7. Preempt mode
If you set “Enable” for this setting, the equipment activated first will have higher
priority. If you set Disable, the priority will be determined according to the Priority
setting.
8. Status
If you set Preempt, the display will change from “VRRP is not enable” to
“MASTER” or “Backup” according to the priority setting.

Furuno FELCOM 500 Specifications

General

Brand	Furuno
Model	FELCOM 500
Category	Marine GPS System
Language	English