Furuno FELCOM 500 Service Manual

 10.9 Initializing
10-47
10.9.3 Initializing the Incoming indicator
1. Reboot the software
You will be able to reboot the software by following the operations described below. There
is no method to initialize the volume setting.
Operations)
If you keep on pressing both the [▼] and [▲] buttons for 5 seconds, a “peep” sound
will be made, and the software will start being rebooted.
2. Reset the hardware
You can initialize the settings and reboot the software by following the operations
described below.
The initialization process will initialize the volume setting.
Operations)
If you keep on pressing the [▼] and [▲] buttons and the [ACK] button for 5 seconds, a
“peep” sound will be made, and when the sound is stopped, the software will start being
initialized and rebooted.

Furuno FELCOM 500 Specifications

General

Brand	Furuno
Model	FELCOM 500
Category	Marine GPS System
Language	English