Garmin aera 500 Series Pilot’s Guide
190-01117-02 Rev. C
36
GPS Navigation
OverviewGPS NavigationFlight PlanningHazard AvoidanceAdditional FeaturesAppendicesIndex
COMPASS ARC
A compass arc appears by default on the Navigation Map. The magenta bug
indicator (similar to the bug indicator on the HSI) can be set to ‘Bearing’ (default),
‘Course to Steer’, a specific heading reference (‘User Selected’), or ‘Off’.
Compass Arc (Navigation Map)
Compass Arc
Magenta Bug Indicator
Displaying/Removing the Compass Arc from the Navigation Map:
1)
From the 'Home' Screen, touch Map > Menu > Set Up Map
2)
Touch the buttons to select the 'General' Category (if necessary).
3)
Touch Compass Arc.
4)
Touch the On/Off Button.
Setting the Compass Arc Bug Indicator:
1)
From the 'Home' Screen, touch Map > Menu > Set Bug Indicator (only
available when the compass arc is displayed).
2)
Touch the desired menu option ('User Selected', 'Bearing', 'Course to
Steer', or 'Off').