Replaceable parts
2001989-351A ApexPro™ 6-5
Bias tee & power supply mounting kit
The mounting kit is for use with the following bias tee and power supply.
The power supply sits inside the bracket and two screws are provided for mounting
the bias tee to the front of the bracket.
065A
For technical specifications, see Bias tee & power supply mounting kit specifications
on page A-16.
Antenna amplifier
The antenna amplifier is used to strengthen the antenna signal. A green LED on the
side indicates that the amplifier is receiving power. The antenna amplifier is DC
passing.
NOTE
Do not plug in backwards! Note the markings on the amplifier for installation
orientation. If connected backwards, the LED will illuminate, however the
amplifier will not work correctly: there will be signal loss instead of gain.
070A
Part number Description
422766-001 Telemetry Power Supply
2001546-001 RF Bias Tee 650MHZ 75 Ohms
2014998-001 Power supply kit with bracket and bias tee
Part number Description Status
2001727-001 U.S. Antenna Amplifier (560–614 MHz) Obsolete
2001727-002 International Antenna Amplifier (420-474 MHz) Obsolete
To Next Page
Loading...
Need help?
General
