Replaceable parts
2001989-351A ApexPro™ 6-9
Block and terminator
75-Ohm terminator
The 75-ohm terminator is used to terminate all unused splitter/combiner and receiver
ports.
NOTE
The 75-ohm terminator must always be used with a DC power block.
DC-power block
The DC-power block is used to isolate antenna system components that are not DC
passive, such as terminations and notch filters, from DC voltage.
Splitters/combiners
The splitters/combiners are used to combine antenna runs to create an antenna field or
used to split an antenna field to support multiple receiver systems.
145A
Part Number Description Drawing Status
17100-001 75 Ohm Terminator
135A
Current
Part Number Description Drawing Status
17102-001 DC Power Block
140A
Current
To Next Page
Loading...
Need help?
General
