GE MEDICAL SYSTEMS CT 9800 WF RELEASE ERRATA
Rev. 17 Direction 18000
8-A-1
M.EM ERROR CODE FILE
WF Change Improved M.EM Error Code listing.
Description WF release provides an enlarged listing of error (IER, ERR,
Status) codes (Illustration 1). More software categories
(Illustration 1) have been added to the range of error codes.
Changed for WF: Besides providing additional error (IER, ERR, Status) code
software categories, the Error Code Format has been
rearranged according to a numeric sort (Illustration 2) instead of
an alphabetic one.
Change to Existing (Pre-WF) Manuals: This change applies only to WF and later.
bold print Words in bold type and underlined, followed by <RETURN> mean you should type that
word or letters and then press the RETURN key; e.g. DIR DA0 <RETURN>, means to
type the words “DIR DA0” and then press the RETURN key.
How to Use the M.EM file: Bring the system to R-level and within directory T13:
TYPE M.EM <RETURN>
Then the M.EM file is displayed as shown on the following pages:
To prevent the display from scrolling M.EM test further,
<CTRL> S simultaneously
To restore the console output suspended by <CTRL> S,
<CTRL> Q simultaneously
To Next Page
Loading...
Need help?
General
