Printing Data 4-9
March 2008
Stop Printing Use the STOP submenu to terminate the printing of live, logged or site
data. To stop any active printing activity, see Figure A-7 on page A-7,
and complete the following steps:
IMPORTANT: Make sure that a printer has been properly set up
before proceeding with this section.
1. To access the Print Menu, press the
[PRNT] key.
Note: The Print Menu is not
protected by the security feature and a
password is never required to access this menu.
2. Press
[F4] = STOP.
3. Press
[F1] to continue printing or press [F2] to Stop the currently
active printing job.
Note: After the STOP command has been issued, the printer will
complete the printing of any data already in the printer buffer.
Either wait for the printer to finish or turn the printer off to
empty the buffer immediately.
The Model DF868 returns to the standard data display screen and
normal measurement taking.
To Next Page
Loading...
Need help?
General
