NX-10 Installers manual
39
5. Press NO to cancel the change and return to the menu option.
Changing binary entries
1. Navigate with the ½¾ keys to the relevant menu option and press OK.
2. The current value for the menu option is displayed, for example, 1 2 3 - - - - 8 means that
1, 2, 3 and 8 are on (included) while 4, 5, 6 and 7 are off (excluded).
3. Press the corresponding numerical key to change a value, for example, press 1 to change
the state of 1 to off and press 4 to change the state of 4 to on. The display changes to - 2 3
4 - - - 8.
4. Press OK to accept the changes.
• If the new values are valid, the keypad beeps once to confirm the change and returns
to the menu option.
• If the new value is invalid, the keypad beeps three times to reject the change and
returns to the menu option.
5. Press NO to cancel the changes and return to the menu option.
Changing numeric entries
1. Navigate with the ½¾ keys to the relevant menu option and press OK.
2. The current value for the menu option is displayed, for example, 55.
3. Do one of the following:
• Press a number key to clear the current value and display the value of the key pressed.
• Press ½
to increase the current value by one.
• Press ¾ to decrease the current value by one.
• Press ## to clear the current value to 0.
4. Press the number keys to enter the value.
5. Press OK to accept the changes.
• If the new value is valid, the keypad beeps once to confirm the change and returns to
the menu option.
• If the new value is invalid, the keypad beeps three times to reject the change and
returns to the menu option.
6. Press NO to cancel the changes and return to the menu option.
Changing phone numbers and phone prefixes
1. Navigate with the ½¾ keys to the relevant menu option and press OK.
2. The current value for the menu option is displayed, for example, 4567999.
3. Do one of the following:
• Press ½ to toggle between insert mode and overwrite mode (insert mode allows you
to insert new numbers and overwrite mode allows you to overwrite existing numbers).
To Next Page
Loading...
Need help?
General
