NX-10 Installers manual
9
Preface
This is the NX-10 Installers manual. This document includes an overview of the product and detailed
instructions explaining:
• how to install and configure the components of your NX-10 system; and
• how to program the system.
To use this document effectively, you should have the following minimum qualifications:
• a basic knowledge of alarm systems and components; and
• a basic knowledge of electrical wiring and low-voltage electrical connections.
Read these instructions and all ancillary documentation entirely before
installing or operating this
product.
Note: A qualified installer, complying with all applicable codes, should perform whatever hardware installation is
required.
Safety terms and symbols
These terms may appear in this manual:
CAUTION: Cautions identify conditions or practices that may result in damage to the equipment or other property.
WARNING: Warnings identify conditions or practices that could result in equipment damage or serious personal injury.
References
For more information, refer to the following:
NX-10 Menu Structure
This menu structure provides a map of the NX-10 menu options, including those for all the additional
modules.
NX Expander Installation Guide
This manual contains detailed information about additional modules and their installation.
To Next Page
Loading...
Need help?
General
